Visonic KF-234 PG2 Accessories Manual page 43

SR-730 PG2
5.
EXIT-ENTRY Beeps
6.
Disabled
7. or
8.
EXIT-ENTRY Beeps
9.
SQUAWK
10.
Disabled
11. or
12.
SQUAWK
13.
SOUNDER VOLUME
14.
Volume HIGH
or
15.
16.
SOUNDER VOLUME
17.
ACTIVITY LED
18.
Disabled
19. or
20.
ACTIVITY LED
21.
AC POWER Connect
22.
Not Connected
or
23.
24.
AC POWER Connect
25.
42
Here you determine whether or not to activate the exit – entry beeps, and
if enabled, whether to activate in HOME or AWAY mode.
Select between "Disabled", "Disabled & Home" and "Enabled".
Here you determine whether or not to activate the squawk, and if enabled,
whether to activate the sounder only, or, the sounder and strobe
simultaneously.
Select between "Disabled", "Sounder only" and "Sounder+strobe".
Here you determine the volume level of the sounder.
Select between "Volume HIGH", "Volume LOW" and "Volume MID".
Here you determine whether or not the LED will be activated to indicate
that the siren is operating.
Select between "Disabled", and "Enabled".
Here you determine whether or not to report a power failure and restore.
Select between "Not Connected" and "Connected to AC".
D-302758