Visonic NEXT PG2 Installation Instructions

NEXT PG2, NEXT-K9 PG2
Wireless, PowerG, Digital PIR / Pet Immune PIR Detectors
1. INTRODUCTION
The Next PG2 and Next-K9 PG2 are 2-way, microprocessor-
controlled, wireless digital PIR detectors.
The detectors features are as follows:
• Combined Fresnel and cylindrical optics, up to 15 meters (49 ft).
• The Next PG2 includes wall creep zone protection.
• In Next PG2 and Next-K9 PG2, Target Specific Imaging™
(TSI) technology is used for distinction between human beings
and pets weighing up to 38 kg (85lb).
• Includes a fully supervised PowerG transceiver.
• The advanced True Motion Recognition™ algorithm (patented)
allows distinguishing between the true motion of an intruder and
any other disturbances which may cause false alarms.
• Sophisticated frequency domain digital signal processing.
2. SPECIFICATIONS
GENERAL
Detector Type: Dual element low-noise pyroelectric sensor
Lens Data: No. of Curtain Beams / curtains:
Next PG2: 18 far, 18 mid, 10 close.
Next-K9 PG2: 18 far, 18 mid, 18 close
Max. Coverage: 15 x 15 m, (49 x 49 ft) / 90°
10m
32.8ft
A
5m
16.4ft
0
5m
16.4ft
10m
32.8ft
0
2.1 m
B
(6.9 ft)
C
0
A. HORIZONTAL VIEW
B. VERTICAL VIEW
C. Next PG2: 0.5-4m, Next-K9 PG2: 2-4m
Fig. 2. Coverage Pattern & Walk-test
Pet Immunity (Next-K9 PG2 only): Up to 38 kg (85 lb).
ELECTRICAL
:
Internal Battery 3V Lithium battery, type CR-123A or equivalent.
Note: For UL installations use Panasonic, Sanyo, GP or Varta
only. Use only the above battery. Dispose of used battery
according to the manufacturer's instructions.
Nominal Battery Capacity: 1450 mA/h
Battery Life (for typical use): 6 years
FUNCTIONAL
True Motion Event Verification: 2 remote selections - 1 (OFF)
or 2 (ON) motion events
Alarm Period: 2 seconds
D-302413
90°
5 10 15 m
16.4 32.8 49.2 ft
5 10 15 m
16.4 32.8 49.2 ft
• No vertical adjustment is needed.
• Motion event counter determines
whether 1 or 2 consecutive motion
events will trigger an alarm.
• Automatic termination of walk-test
after 15 minutes.
• Microprocessor-controlled temperature
compensation.
• Sealed chamber protects the optical
system.
• Front cover and back tamper switches,
for improved tamper protection.
• White light protection.
WIRELESS
Frequency Band (MHz): Europe: 433, 868, USA: 915
Modulation: GFSK
Antenna: Built-in helical antenna
Communication Protocol: PowerG
Supervision: Signaling at 4-min. intervals
Tamper Alert: Reported when a tamper event occurs and in any
subsequent message, until the tamper switch is restored
MOUNTING
Height: 1.8 - 2.4 m (6 - 8 ft). For Next PG2, the recommended
height is up to 2.1 m (7 ft)
Installation Options: Surface or corner
ACCESSORIES
BR-1: Surface mounted swivel bracket, adjustable 30° down and
45° left/45° right.
BR-2: BR-1 with a corner adapter
BR-3: BR-1 with a ceiling adapter
ENVIRONMENTAL
RFI Protection: >20 V/m up to 2000 MHz, excluding inband
frequencies
Operating Temperatures: -10
Storage Temperatures: -20
Compliance with Standards:
Europe: EN 300220, EN 50131-1 Grade 2, Class II. EN 301489,
EN 50130-4, EN 60950, EN 50131-2-2
USA: CFR47 Part 15
Canada: RSS 210
PHYSICAL
Size (H x W x D): 94.5 x 63.5 x 53.0 mm (3-11/16 x 2-1/2 x 2-
1/16").
Weight (with battery): 70 g (2.5 oz).
Color: White
PATENTS
U.S. Patents 5,693,943 6,211,522
pending)
Installation
Instructions
A. LED
B. Lens
Figure 1:
External View
C to 50 C (14 F to 122 F) indoor
° ° ° °
C to 60 C (-4 F to 140 F).
° ° ° °
D445,709 (another patent
A
B
1