Rekluse RadiusCX Installation & User Manual page 33

A Rekluse auto-clutch can make your motorcycle appear
to be in neutral when in gear, even when the engine is
running and clutch lever released.
Motorcycles equipped with a Rekluse auto-clutch can
move suddenly and unexpectedly and cause riders to
lose control. To avoid death, serious injury, and/or
property damage, always sit on the motorcycle to start
it.
a) Before you begin, place the bike in NEUTRAL, start the
engine and let it warm up for 2-3 minutes to idle down
and warm the engine oil.
b) Stretch the included rubber
band between your thumbs,
and then place the top end of
the rubber band on the outer
end of the left handlebar grip.
c) While holding the top end of
the rubber band against the
handlebar, stretch the band
downward, and then loop it
through itself.
d) Pull the band through the loop,
and then attach it to the
outside end of the clutch lever.
e) While still in NEUTRAL,
quickly rev the engine between 5,000-7,000 RPM (1/2 to
¾ throttle), then let it return to idle. Notice the movement
in the clutch lever when the engine is revved. This is your
Free Play Gain.
Doc ID: 191-7913A
Doc Rev: 082018
Pg. 33