Table of Contents
Advertisement
7. With the clutch fluid line attached to the Rekluse slave
cylinder, remove the OE slave cylinder from the engine.
Keep the OE bolts for reuse.
8. Mount the Rekluse slave cylinder to the engine using the
OE bolts.
NOTE: Some models have a piston diaphragm seal. DO
NOT reuse them if OE equipped. The Rekluse slave cylinder
does not require a diaphragm seal.
Pg. 24
Doc ID: 191-7913A
Doc Rev: 082018
Advertisement
Table of Contents
Need help?
Do you have a question about the RadiusCX and is the answer not in the manual?