Door Preparation; Add Or Remove Cylinder; Installation And Orientation Of Cylinder - Assa Abloy Arrow AL-500 Series Installation Instructions Manual

AL-500 Series
Alarmed Exit Devices
Installation Instructions
6 Installation Instructions (cont .)
a

Door Preparation

1. Prepare door according to template.
2. Verify size 1-1/8" cylinder is installed in rail insert with collar prior to installing exit device on door.
NOTE: Use caution not to dam age wires when installing cylinder nut.
b

Add or Remove Cylinder

1. Remove insert assembly from rail by sliding toward rail end (Figure 11).
c

Installation and Orientation of Cylinder

1. Slide cylinder through collar into insert
as shown (Figure 12).
2. Note orientation of cylinder.
3. Secure cylinder with cylinder nut,
tightening firmly.
4. Operate cylinder and verify cam is
operating switch properly (Figure 13).
1-800-327-8539 • www.arrowlock.com
Copyright © 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in partwithout the express written permission of ASSA ABLOY Access and
Egress Hardware Group, Inc. is prohibited.
Collar
Cylinder nut
Figure 10
Figure 11
Side View. Battery holder
not shown.
Use caution not to dam-
age wires when installing
cylinder nut.
Figure 12
6
Figure 13
A8265A 08/19