TaiShan 200 Server (Model 2280)
User Guide
Figure 5-64 RAID controller card information
Step 4 Configure a RAID array.
The RAID configuration method varies according to the RAID controller card
model. For details, see the
Processors)
----End
5.12.8 Configuring the BIOS
For details, see
5.12.8.1 Accessing the BIOS
Step 1 Log in to the Remote Virtual Console. For details, see
Remote Virtual
Step 2 On the Remote Virtual Console, click
Forced System Reset to power on the server.
Step 3 When the screen shown in
●
●
Issue 09 (2021-01-12)
NO TE
The information shown in
differ.
.
BIOS Parameter Reference (Kunpeng 920 Processor)
Console.
NO TE
A forced restart may damage user programs or unsaved data. Exercise caution when
performing this operation.
If the system prompts you to enter the current password, as shown in
5-66, go to
Step 4
and skip
If the dialog box shown in
Step
5.
NO TE
● Press F12 to boot from the network.
● Press F2 for boot options.
● Press F6 to enter the Smart Provisioning boot screen.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-64
is for reference only. The actual information may
RAID Controller Card User Guide (Kunpeng
or
Figure 5-65
is displayed, press Delete or F4.
Step
5.
Figure 5-67
is displayed, skip
5 Installation and Configuration
8.2 Logging In to the
on the menu bar. Select Reset or
Step 4
.
Figure
and go to
104