Flexio Cards - Huawei TaiShan 200 23280 User Manual

TaiShan 200 Server (Model 2280)
User Guide
Indicator
25GE
optical
port
PSU indicator

2.5 FlexIO Cards

For details about FlexIO cards supported by the server, see the
Product Compatibility
of each FlexIO card, see the corresponding user guide.
The following figures show the indicators on the FlexIO cards.
Issue 09 (2021-01-12)
Transmission rate
indicator
Connection status
indicator/Data
transmission status
indicator
Checker. For details about the specifications and features
Copyright © Huawei Technologies Co., Ltd.
State Description
● Steady green: The data transmission
rate is 25 Gbit/s.
● Steady yellow: The data transmission
rate is 10 Gbit/s.
● Off: The network port is not connected.
● Steady green: The network port is
properly connected.
● Blinking green: Data is being
transmitted.
● Off: The network port is not connected.
● Steady green: The power input and
output are normal.
● Steady orange: The input is normal, but
no power output is supplied due to
overheat protection, overcurrent
protection, short circuit protection,
output overvoltage protection, or some
component failures.
● Blinking green at 1 Hz:
– The input is normal, the server is
standby.
– The input is overvoltage or
undervoltage. For details, see
TaiShan Rack Server iBMC Alarm
Handling
.
● Blinking green at 4 Hz: under online
PSU firmware upgrade.
● Off: No power is supplied.
2 Components
Computing
18