Huawei TaiShan 200 23280 User Manual page 22

TaiShan 200 Server (Model 2280)
User Guide
Silkscr
een
Issue 09 (2021-01-12)
Indicator/ State Description
Button
Power Power indicator
button/
● Steady yellow: The server is in the standby state.
indicator
● Steady green: The server is properly powered on.
● Blinking yellow: The iBMC is starting.
● Off: The server is not connected to a power source.
Power indicator
● When the server is powered on, you can press this
button to shut down the OS.
● When the server is powered on, you can hold down
this button for 6 seconds to force the server to power
off.
● When the server is in the standby state, you can press
this button to start the server.
UID The UID button/indicator helps identify and locate a
button/ device.
indicator
UID indicator:
● Off: The device is not being located.
● Blinking blue (blinking 255 seconds): The device has
been located and is differentiated from other devices
that have also been located.
● Steady blue: The device is being located.
UID button:
● You can turn on, turn off, or blink the UID indicator by
pressing the UID button on the panel or by using the
iBMC CLI or WebUI.
● You can press this button to turn on or off the UID
indicator.
● You can press and hold down this button for about 5
seconds to reset the iBMC.
Health ● Steady green: The server is operating properly.
indicator
● Blinking red at 1 Hz: A major alarm has been
generated on the server.
● Blinking red at 5 Hz: A critical alarm has been
generated on the server.
FlexIO ● 1 and 2: represent FlexIO cards 1 and 2 respectively.
presence
● Steady green: The FlexIO card is installed and can be
indicators
identified.
(1 and 2)
● Off: The FlexIO card is not installed or faulty.
Copyright © Huawei Technologies Co., Ltd.
2 Components
14