Huawei TaiShan 200 23280 User Manual page 144

TaiShan 200 Server (Model 2280)
User Guide
Step 1 Download an SSH communication tool to a local client.
Step 2 Connect the client to the server management network port directly or through a
network.
Step 3 Set the client IP address so that the client can communicate with the server iBMC
management network port.
Step 4 On the client, open the SSH tool and set related parameters, such as the IP
address.
Step 5 Connect to the iBMC and enter the user name and password.
----End
Logging In over the Serial Port
Step 1 Set the serial port as the iBMC serial port.
●
Issue 09 (2021-01-12)
NO TE
SSH supports the AES128-CTR, AES192-CTR, and AES256-CTR encryption algorithms.
When you log in to the iBMC over SSH, select a proper encryption algorithm.
NO TE
● Local and LDAP users can both log in to the iBMC CLI over SSH.
● To log in to the iBMC, LDAP users do not need to enter information about the domain
server, which is automatically assigned by the system.
To set the serial port through the iBMC CLI, do as follows:
a. Log in to the iBMC CLI over SSH.
b. Run the following command to change the serial port direction:
ipmcset -d serialdir -v
Copyright © Huawei Technologies Co., Ltd.
8 Common Operations (iBMC V250 or Later)
<option>
136