Huawei TaiShan 200 23280 User Manual page 172

TaiShan 200 Server (Model 2280)
User Guide
Procedure
Step 1 Set an IP address and a subnet mask or add route information for the PC to
communicate with the server.
On the PC command-line interface (CLI), run the following command to check
whether the IP address is reachable:
Ping
●
●
Step 2 Double-click PuTTY.exe.
The PuTTY Configuration window is displayed, as shown in
Figure 9-20 PuTTY Configuration window
Step 3 In the navigation tree, choose Session.
Step 4 Set the login parameters.
Issue 09 (2021-01-12)
NO TE
● Visit the chiark website and download the PuTTY software from the homepage.
● PuTTY of an earlier version may cause server login failures. You are advised to use
PuTTY of the latest version.
Server IP address
If yes, go to Step 2.
If no, check the network connection, rectify the fault, and go to
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations (iBMC V3.01.00.00 or Later)
Step 1.
Figure 9-20.
164