Huawei TaiShan 200 23280 User Manual page 18

TaiShan 200 Server (Model 2280)
User Guide
Table 2-1 Description of ports on the front panel
Port
USB port
VGA port
SN
The serial number (SN) on the label is a string that uniquely identifies a server.
The SN is required when you contact Huawei technical support.
Figure 2-6
Figure 2-6 SN example
Table 2-2 SN description
No.
1
2
3
Issue 09 (2021-01-12)
Type
USB 3.0
DB15
shows the SN format.
Description
SN ID (two characters), which is 21.
Material identification code (eight characters), that is, processing
code.
Code of a processing factory (two characters). The value 10
indicates Huawei.
Copyright © Huawei Technologies Co., Ltd.
Description
The USB ports allow USB devices to be
connected to the server.
NOTE
● Before connecting an external USB device,
check that the USB device functions properly.
A server may operate abnormally if an
abnormal USB device is connected.
● If an external USB device is used, the
maximum length of the extension cable is 1
m.
The VGA port is connected to a terminal,
such as a monitor or physical KVM.
NOTE
The VGA port on the front panel does not have
cable screws. The VGA cable is easy to fall off.
You are advised to use the VGA port on the rear
panel.
2 Components
10