Huawei TaiShan 200 23280 User Manual page 120

TaiShan 200 Server (Model 2280)
User Guide
Figure 5-76 PXE Configuration screen
Step 4 Configure the PXE function.
1.
2.
Step 5 Select a network protocol for PXE boot.
1.
2.
Step 6 Press F10.
The system displays the "Save configuration changes and exit?" dialog box.
Step 7 Select Yes and press Enter.
The server automatically restarts for the settings to take effect.
----End
Issue 09 (2021-01-12)
Select the network port such as PXE1 Configuration, and press Enter.
In the dialog box that is displayed, select Enable and press Enter.
Select PXE Boot Capability and press Enter.
In the dialog box that is displayed, select a network protocol that needs to be
supported.
– UEFI: IPv4
– UEFI: IPv6
– UEFI: IPv4/IPv6
NO TE
The value of this parameter varies according to the server model or BIOS version.
Copyright © Huawei Technologies Co., Ltd.
5 Installation and Configuration
112