Huawei TaiShan 200 23280 User Manual page 125

TaiShan 200 Server (Model 2280)
User Guide
Figure 5-81 Security screen
Step 3 Select Set Supervisor Password, press Enter, enter the original password, and set
or modify the administrator password for login.
Step 4 (Optional) After the setting is successful, click Clear Supervisor Password. Before
clearing the password, enter the current password.
Step 5 Press F10.
The system displays the "Save configuration changes and exit?" dialog box.
Step 6 Select Yes and press Enter.
The server automatically restarts for the settings to take effect.
----End
Issue 09 (2021-01-12)
NO TE
● The administrator password must be a string of 8 to 16 characters, and contain at least
three types of the following characters: special characters including spaces (mandatory),
uppercase letters, lowercase letters, and digits.
● The new password cannot be the same as 3 to 6 previously used passwords.
● The default BIOS password is Admin@9000. If the BIOS version supports the first-login
password function, the BIOS does not have a password by default, and the system
prompts you to set a new password when you access the Setup screen for the first time.
NO TE
The Clear Supervisor Password parameter is not supported if the BIOS version supports
the first-login password function (The BIOS does not have a password by default, and the
system prompts you to set a new password when you access the Setup screen for the first
time).
Copyright © Huawei Technologies Co., Ltd.
5 Installation and Configuration
117