Advertisement
XL LED Remote Display
This manual provides instructions for the installation, operation, and maintenance of the
LectroCount XL LED Remote Display. LectroCount XL LED Remote Displays display the
volume of metered product in a six-digit configuration of high-intensity LED lights. The 2¼-inch
digits are viewable at up to 250 feet from the display.
NOTE: Throughout this guide, the XL LED Remote Display is referred to as
"Display" (unless otherwise specifically referenced by name).
Features
·
6-digit, high-intensity LED display with 2¼-inch display characters
·
Viewable from up to 250 feet
·
30-foot, four-wire, shielded cable
·
Weatherproof NEMA 4X enclosure
Model Numbers & Device Compatibility
The four models of the LectroCount XL LED Remote Display are compatible with all current
and legacy LectroCount registers, solid-state quadrature pulsers, solid-state single channel
pulsers, and the LCMag™ HML210 converter.
LectroCount XL LED Remote Display Compatibility
VERIFY COMPATIBILITY
To ensure that the LectroCount XL LED Remote Display with the device to
which it will connect, verify the model number on the serial number tag.
The serial number tag can be found on the top of display, as shown in the
figure below.
The display is compatible with these devices:
·
E1615 LectroCount LCR® 600 and LectroCount LCR-II
Get the latest PDF manual:
Mobile/online version of this manual:
https://www.lcmeter.com/resources/technical/manuals
https://www.lcmeter.com/manuals
XL LED Remote Display
3
Advertisement
