Advertisement
The reset switch can not zero out the totalizer while a delivery is active. To zero the display
totalizer, the reset switch must be pushed when the display is not receiving a pulse output. The
switch must be pushed and held for two seconds before the display will reset to zero.
The Reset Switch Kit includes:
·
½", 4-port conduit box (2)
·
Port plugs (2)
·
Cord grips (3)
·
Reset switch
·
Nipple
·
30-foot shielded cable
Follow these steps to install the Rate of Flow Switch Kit:
1. Determine the best location for the push button.
2. Mount the conduit box at the determined location.
3. Attach a 4-port conduit box to the empty port on the bottom of the unit.
4. If mounting the reset switch directly to the XL LED Display, screw the reset switch into a
port on the 4-port conduit box.
5. If mounting the reset switch remotely, mount the second 4-port conduit box and screw the
reset switch into a port on the second 4-port conduit box.
6. Screw the cord grips into the conduit box(es). Use diagrams below to determine the best
ports for cord grips.
Get the latest PDF manual:
Mobile/online version of this manual:
https://www.lcmeter.com/resources/technical/manuals
https://www.lcmeter.com/manuals
XL LED Remote Display
25
Advertisement
