Advertisement
Remote Display Shield Accessory (PN 81879)
In some installations, sun or bright light may produce
glare on the display. A Remote Display Shield is
available as an accessory to the LectroCount XL LED
Remote Display to reduce the effect of glare.
Follow these steps to mount the Remote Display Shield:
1. Slide the shield over the display.
2. Align the four slot-holes in the shield with the four holes in the rear cover of the
LectroCount XL LED Remote Display.
3. Using four ¼-inch screws, screw the display and the shield to a secure location through
the four holes in the rear cover of the display and the four holes of the display shield.
Get the latest PDF manual:
Mobile/online version of this manual:
https://www.lcmeter.com/resources/technical/manuals
https://www.lcmeter.com/manuals
XL LED Remote Display
12
Advertisement
