Advertisement
Follow these general steps to install the LectroCount XL LED Remote Display:
1. Check contents of the shipment and ensure that it contains the correct model.
2. Determine which accessories and settings are necessary and include them into your
installation.
3. Mount the LectroCount XL LED Remote Display.
4. Wire the LectroCount XL LED Remote Display.
Guidelines
·
Read this manual prior to start of installation – If you have any questions, consult with
your full-service distributor or call the Service Department at Liquid Controls.
·
Avoid excessive vibration or shock – Ensure that the display does not sustain any
excessive vibration or shock. Also ensure that the display maintains a secure mount to a
platform or supportive member.
·
Match LectroCount XL LED Remote Display with the proper device – The four
models of the LectroCount XL LED Remote Display are designed for use only with the
devices in the list above. No attempt should be made to connect the display to an input
other than a compatible device. Model numbers and compatibility are shown on the serial
number tag for the display. See Model Number and Device Compatibility in
Remote Display
·
Use Proper Cabling and Wires – The LectroCount XL LED Remote Display comes with
a 30-foot, 4-wire shielded cable with 22 gauge wire. The shielded cable should be
adequate for most installations. If alternate cabling is necessary, Liquid Controls
recommends a 4-wire shielded cable with 22-gauge wire (or larger) and a maximum cable
length of 30 feet.
·
Secure Cable and Tighten Cover Up on Reassembly – LectroCount XL LED Remote
Displays ship ready for final cable termination. If it's necessary to remove the pre-installed
shielded cable during installation, be sure to secure the cable and tighten the cover screws
in the correct torque pattern so the vapor seal remains intact. See
Specifications
28
Get the latest PDF manual:
Mobile/online version of this manual:
.
3
for more information.
https://www.lcmeter.com/resources/technical/manuals
https://www.lcmeter.com/manuals
XL LED Remote Display
XL LED
Torque
10
Advertisement
