Advertisement
Mounting
LED displays have an optimum viewing angle. Outside of the optimum viewing angle, displays
have an apparent loss of contrast and can be difficult to view. To provide a wide viewing area,
a bias has been designed into the LectroCount XL LED Remote Display. The bias creates a
optimum viewing angle offset by 75° in either direction from the horizontal and vertical
perpendicular. The LectroCount XL LED Remote Display will appear to have the maximum
contrast when viewing from within this viewing angle.
Review the manual and determine the necessary steps for your specific installation. Some
XL LED Remote Display accessories and settings require connections and settings inside
the display housing. Complete these installations and configurations prior to mounting the
display.
Follow these steps to mount the LectroCount XL LED Remote Display:
1. Select a mounting location where the display is inside the optimum viewing angle at the
most common viewing points.
2. Using four ¼" screws, screw the display to a secure location through the four holes in the
rear cover of the display.
Get the latest PDF manual:
Mobile/online version of this manual:
BEFORE MOUNTING
https://www.lcmeter.com/resources/technical/manuals
https://www.lcmeter.com/manuals
XL LED Remote Display
11
Advertisement
