Mounting - Parker Compumotor 6000 Series Installation Manual

Mounting

¥ To mount the AUX board, you must first attach the mounting brackets. The mounting brackets and 6-
32 (0.25-inch) mounting screws are provided in the ship kit.
¥ Do not use screws longer than 0.25 inches (6.35 mm); they protrude too far into the sheet metal and
may damage the AUX board.
¥ Mount the AUX board within the reach of the supplied 5-foot indexer-to-AUX cable. You may not
lengthen or shorten this cable. A 15-foot cable is available (part number 71-012832-15).
¥ Environmental Considerations:
- Humidity. Keep below 95%, non-condensing.
- Airborne Contaminants, Liquids. Particulate
contaminants, especially electrically conductive
material, such as metal shavings and grinding
dust, can damage the AT6n50. Do not allow
liquids or fluids to come in contact with the AT6n50
or its cables.
- Temperature. Operate the AT6n50 AUX board in
ambient temperatures between 32°F (0°C) and
122°F (50°C). Provide a minimum of 6 inches
(152.4 mm) of unrestricted air-flow space around
the AUX board (see illustration). Fan cooling may
be necessary if adequate air flow is not provided.
AC Input AUX Boards
0.25 (6.35) 2.00 (50.80)
Mounting brackets
and 6-32 (0.25-inch)
mounting screws are
provided in the ship
kit (part number
53-012068-01).
0.375 (9.53)
1.25
Optional Mounting
(31.75)
6 AT6250/AT6450 Installation Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PRECAUTIONS
6.10 (154.94)
0.20 0.75
1.25
(5.08) (19.05)
(31.75)
2.43 (61.72)
10.10
(256.54)
11.20
(284.48)
Provision for #10
Mounting Screws
Tab Location
(4 Plcs.)
Minimum Airflow Space = 6 in (152.4 mm)
6.0
(152.4)
6.0
(152.4) (152.4)
6.0
(152.4)
DC Input AUX Boards
1.75
(44.45)
0.20
0.35 (8.89) (5.08)
0.55
(13.97)
11.20
(284.48)
6.0
6.10 (154.94)
0.20
5.00 (127.00) (5.08)
(294.64)
10.70
(271.78)
Provision for #10
Mounting Screws
11.60