Menu; Inst; Edit ([F3] (Edit) Button) - Roland TM-6 PRO Data List

MENU

Here's how to make overall settings for the TM-6 PRO, and for individual instruments and effects.
1
Press the [MENU] button.
The MENU screen appears.
2
Use cursor buttons to select the menu item for the settings that you want to make, and then press the [ENTER]
button.
Menu Explanation

INST

Make instrument settings.
PAD-FX Make pad effect settings.
KIT-FX Make kit effect settings.
KIT COMMON Make kit settings.
MIDI Make MIDI settings for the kit or for the entire TM-6 PRO.
SYS Make settings for the entire TM-6 PRO.
3
Edit the settings of the menu that you selected.
4
Press the [EXIT] button several times to return to the KIT screen.
Reference
For more about menu operations, refer to "Reference Manual" (PDF).
INST
Parameters that can be edited for each instrument
Parameter
Instrument A, instrument B
[F2] (B ON/OFF) button
[F3] (EDIT) button

EDIT ([F3] (EDIT) button)

Parameter
EDIT tab
Volume
Pitch
Decay*1
6
Value
001–268 (preset)
U001–U1000 (user sample)
B OFF, B ON
–
Value
-INF–+6.0dB
-2400–+2400
1–100
Explanation
Instrument number
Reference
For more about instruments, refer to "Instrument List" (p. 33).
If this is "ON, " instrument B is sounded in addition to the usual instrument A. This lets you layer the
two instruments, or switch between them depending on the force of your strike. To specify how the
instrument sounds, make settings in the [F3] (EDIT) button's SETUP tab.
This lets you make detailed settings for the instrument.
Instrument parameters can be set independently for instruments A and B.
Explanation
Instrument volume
MEMO
You can also use a sound modify knob to adjust this setting.
Instrument pitch (units of one cent)
MEMO
You can also use a sound modify knob to adjust this setting.
Length of decay
MEMO
You can also use a sound modify knob to adjust this setting.
Page
p. 6
p. 8
p. 10
p. 13
p. 14
p. 16