User Sample; List; Edit ([F3] Button) - Roland TM-6 PRO Data List

USER SAMPLE

LIST

Here's how to specify the play/stop positions of a user sample, and how it plays (play type).
1
Press the [USER SAMPLE] button.
2
Use the cursor buttons to select "LIST," and then press the [ENTER] button.
The SAMPLE LIST screen appears.
3
Press the [F3] (EDIT) button.
4
Use cursor buttons to select the menu item for the settings that you want to make, and then press the [ENTER]
button.
Menu Explanation
Play Type/Gain Specifies a user sample's volume and playback type.
Adjust Start/End
Specifies a user sample's play/stop positions.
Renames the currently selected user sample.
Rename
5
Edit the settings of the menu that you selected.
6
Press the [EXIT] button several times to return to the KIT screen.

EDIT ([F3] button)

Play Type/Gain
Parameter
Sample Gain
Play Type
Adjust Start/End
Parameter
Zoom
START*1
END*1
[F1] (PREVIEW) button
*1 You can't set the end point earlier than the start point.
You can't set the start point and end point to the same value.
For both the start point and end point, you can't specify a value that exceeds the length of the user sample.
20
Reference
For details, refer to "Renaming a Kit" in "Reference Manual" (PDF).
Value
-12–+12 [dB]
Specifies how the user sample is sounded.
ONESHOT MONO
ONESHOT POLY
LOOP ALT
Value
–
0–07937742
257–07937999
–
Explanation
User sample volume
When you strike the drum trigger, the currently-heard sound is silenced before the new sound is
heard. Notes do not overlap (mono).
When you strike the drum trigger repeatedly, the sounds of the notes are heard overlapping (poly).
The user sample plays repeatedly (loop).
Each time you strike the drum trigger, the sound alternately plays or stops.
Explanation
Zooms the waveform display in or out.
By holding down the [ENTER] button and using the cursor [<] [>] buttons, you can zoom-in/out for
the horizontal axis.
Use the [ ] [ ] buttons to zoom-in/out for the vertical axis.
Adjusts the start point (the location at which the user sample starts playing).
The amount by which the value changes will differ according to the ZOOM ratio of the horizontal
axis.
Adjusts the end point (the location at which the user sample stops playing).
The amount by which the value changes will differ according to the ZOOM ratio of the horizontal
axis.
Plays the user sample with the current settings. During playback, press the [F1] (PREVIEW) button
once again to stop.