Trigger Setup; Basic Procedure For Trigger Settings; Bank - Roland TM-6 PRO Data List

TRIGGER SETUP

Basic Procedure for Trigger Settings

Here's how to make trigger settings so that the signals from the drum triggers can be accurately processed by the TM-6 PRO.
1
Press the [TRIG] button.
The TRIGGER SETUP screen appears.
2
Use cursor buttons to select the menu item for the settings that you want to make, and then press the [ENTER]
button.
Menu Explanation

BANK

Specify the type of each drum trigger. These settings can be collectively saved in a trigger bank. p. 21
PARAM
Specify settings such as the drum trigger's minimum sensitivity (Threshold).
HI-HAT
Make hi-hat settings.
Prevent unintended triggering caused by the vibration of another drum trigger
(crosstalk cancel).
XTALK
MONITOR View the trigger response and history of each drum trigger.
LOCK Make trigger lock settings.
3
Edit the settings of the menu that you selected.
4
Press the [EXIT] button several times to return to the KIT screen.
BANK
Parameter
Bank No.
Input Type
Trig Type*1
[F2] button
[F3] button
*1 If you connect a BT-1 to a trigger input whose Input Type is set to "PADx2, " set Trig Type to "BT-1 SENS. "
Reference
For details, refer to "Preventing Unintended Triggering Caused by Vibration of Another Drum
Trigger (Crosstalk Cancel)" in "Reference Manual" (PDF).
Value
1–8
H&R, PADx2
Refer to "Trig Type list" (p. 24)
Moves to the TRIGGER THRESHOLD screen of the selected trigger type (This parameter is in common with PARAM (p. 22).).
Edits the name of the trigger bank.
Reference
For details, refer to "Renaming a Kit" in "Reference Manual" (PDF).
Explanation
Trigger bank number
Specifies whether a single drum trigger (H&R) or two drum triggers (PADx2) are connected to one
TRIGGER IN jack.
Specifies the model (trigger type) of the drum trigger that is connected to each trigger input.
MEMO
When you specify the trigger type, the trigger parameters (with some exceptions, such as
crosstalk cancel) are set to the appropriate values for stage performance (For example, the
Threshold value will be set relatively high.).
These are only suggested values, so you should make fine adjustments as appropriate for the
way in which the drum trigger is attached and the conditions of use.
Page
p. 22
p. 24
–
–
p. 24
21