Param - Roland TM-6 PRO Data List

TRIGGER SETUP

PARAM

Parameter
THRESHOLD/SENS tab
Input Type
Trig Type*1
Threshold
Sensitivity
Curve
22
Value Explanation
This is the same parameter as Input Type (p. 21) in the BANK.
This is the same parameter as Trig Type (p. 21) in the BANK.
Minimum sensitivity of the drum trigger
This setting allows a trigger signal to be received only when the
drum trigger is above a determined force level (velocity). This
can be used to prevent a drum trigger from sounding because of
0–31
vibrations from other drum triggers. In the following example, B
will sound but A and C will not sound.
Check this and adjust accordingly. Repeat this process until you get
the perfect setting for your playing style.
You can adjust the sensitivity of the drum triggers to accommodate your personal playing style.
Increasing this value increases the sensitivity, so that even soft strikes on the drum trigger are sounded at
1–32
high volume. Decreasing this value decreases the sensitivity, so that even strong strikes on the drum trigger
are sounded at low volume.
Volume change in response to drum trigger strike strength
Volume
LINEAR
Volume
EXP1, EXP2
Volume
LOG1, LOG2
Volume
SPLINE
SPLINE
Volume
LOUD1, LOUD2
LOUD1
Playing
dynamics
LINEAR
Volume
Playing Playing
dynamics dynamics
EXP1 EXP1 EXP2 EXP2
Volume
Playing Playing
dynamics dynamics
LOG1 LOG1 LOG2 LOG2
Playing
dynamics
Volume
Playing Playing
dynamics dynamics
LOUD1 LOUD2 LOUD2
Threshold
The standard setting. This produces the most natural
correspondence between playing dynamics and
volume change.
Compared to "LINEAR, " strong dynamics produce a
greater change.
Compared to "LINEAR, " a soft playing produces a
greater change.
Extreme changes are made in response to playing
dynamics.
Very little dynamic response, making it easy to
maintain strong volume levels. If you're using a drum
trigger as an external drum trigger, these settings will
produce reliable triggering.