Midi; Kit Midi - Roland TM-6 PRO Data List

Trigger module
Hide thumbs Also See for TM-6 PRO:
Table of Contents

Advertisement

MENU
Parameter

MIDI

KIT MIDI

Parameter
NOTE tab
Note No.
GATE tab
Gate Time
CH tab
MIDI Channel
MIDI note numbers transmitted and received by the hi-hat
Item
HH CLOSE <BOW>
HH CLOSE <EDGE>
HH PEDAL
When setting multiple drum triggers to the same note number
When playing the internal sound generator of the TM-6 PRO, if an incoming note number is assigned to more than one drum trigger, that note plays
the instrument of the drum trigger with the lowest trigger input number. If the same note number is assigned to both the head and the rim, the head
instrument is sounded.
MEMO
An asterisk (*) appears at the right of the note number for trigger inputs that are not sounded.
Example:
Note number "38 (D 2)" is set for the head and rim of trigger input 2 SNARE and the head of trigger input 3 TOM 1. In this case, when note number 38
(D2) is received, the instrument assigned to the head of trigger input 2 SNARE is played.
About the gate time
Percussion sound modules normally produce sound only in response to "Note on" messages, and ignore "Note off" messages. However general-
purpose sound modules or samplers do receive the note-off messages that are transmitted and respond by turning off the sound.
Since gate time is normally not necessary for a percussion sound module, this is set to the minimum value when the unit is shipped from the
factory. If a note-off message is received while the sound module has this setting, it is received as an extremely brief note that has almost no
time to be heard, and is nearly inaudible (Alternatively, it is possible that this could be heard as an unwanted noise.). To avoid this, specify the
note duration of the MIDI performance data that is produced when you strike each drum trigger.
* If the same note number is sounded again in an overlapping manner, a note-off is transmitted before transmitting note-on, even if it is
within the gate time.
14
Explanation
Edits the name of the kit.
Reference
Refer to "Renaming a Kit" in the "Reference Manual" (PDF).
Value
0 (C -)–127(G 9)
OFF
0.1– 8.0 s
CH1–CH16
GLOBAL
Explanation
MIDI note number transmitted and received by closed hi-hat (bow, edge)
MIDI note number transmitted and received by pedal hi-hat
Explanation
MIDI note number transmitted and received by each drum trigger
Note messages are not transmitted or received
Duration of the note transmitted by each drum trigger
MIDI channel on which each drum trigger transmits or receives note messages or control change
messages
This is specified individually for each kit.
Transmitted and received on the transmit/receive channel (p. 15) specified in GLOBAL SETUP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents