Calibration - Rice Lake iDimension PWD Operation Manual

5.0

Calibration

This section provides an overview of iDimension PWD Calibration menu instructions.
The Calibration menu provides access to the following information:
• Calibration settings for the Sensor Calibration and Set Work Area configuration
• Camera calibration – if required, calibrates the iDimension PWD using the calibration object
To enter the Calibration menu use the following procedure:
1. Connect the iDimension PWD via ethernet to a computer.
2. Open a web browser and enter: http://192.168.0.2. QubeVu Manager displays. If IP static address has been set
different from the factory default, use the USB touchscreen display to identify IP address.
Parameter
Displays
Operator Tools
Admin Tools
License
Figure 5-1. QubeVu Manager Home Page
Display information (iDimension PWD Managers Guide (PN 198680))
Operator tools information (iDimension PWD Managers Guide (PN 198680))
Admin tools instructions (iDimension PWD Managers Guide (PN 198680))
License information (iDimension PWD Managers Guide (PN 198680))
Table 5-1. QubeVu Manager Home Page Navigation
© Rice Lake Weighing Systems ● All Rights Reserved
Description
Calibration
15