Loading Paper Into The Twin Interposer - Ricoh IM C6500 User Manual

9. Adding Paper and Toner
• Load paper with its printed side up (the front side).
• Load paper in the interposer in the same orientation as paper in the paper tray.
• The staple position or punch hole position will be on the left side of the paper, when you are facing
the machine.
• To load the paper in the interposer, align the orientation of originals in the ADF as shown below.

Loading Paper into the Twin Interposer

• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size
not being correctly scanned or paper jams.
Load paper in the Interposer Upper Tray and Interposer Lower Tray in the same way. This procedure for
the Interposer Upper Tray is described.
1. While pressing the release lever, align the side fences with the paper size to be loaded.
2. Load paper orderly.
When loading paper larger than A4 (8
Do not stack paper over the limit mark.
206
Interposer
D0CMIC1297
1
/ × 11) , pull out the paper extender.
2
ADF