Ricoh IM C6500 User Manual page 187

1. Open the bypass tray.
2. Pull the extender out when loading paper whose size is larger than A4
3. Insert the paper print side up as far as it will go into the machine.
Fan sheets before loading so that multiple sheets of paper do not stick to each other and are not
fed at once.
When loading envelopes or letterhead paper, confirm the orientation, face and back, or location
of flaps.
page 230 "Envelope Orientation and Recommended Status"
page 233 "Loading Orientation-fixed Paper or Two-sided Paper"
4. Align the paper guides to the paper size.
If the guides are not flush against the paper, images might be skewed or paper misfeeds might
occur.
When loading thin paper, keep the gap between the paper and each paper guide within 0.5 mm.
If the gap is too wide, creases may occur.
Left: Plain Paper
Right: Thick Paper
D0CMIC1373
D0CMIC1279
Loading Paper into the Paper Tray
1
or 8 / × 11 .
2
185