Loading Paper Into The Twin Interposer - Ricoh Pro C5100s User Manual

Loading Paper into the Twin Interposer

• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size
not being correctly scanned or paper jams.
1. While pressing the release lever, align the side fences with the paper size to be loaded.
2. Load paper orderly.
Do not stack paper over the limit mark.
Align the side fences gently against the paper you loaded, if necessary.
1 1
1. Paper extenders
• Load paper with its printed side up (the front side).
• Load paper in the twin interposer in the same orientation as paper in the paper tray.
• The staple position or punch hole position will be on the left side of the paper, when you are facing
the machine.
• When loading paper larger than A4 (8
CVA032
CVA033
1
/ × 11) , pull out the paper extender.
2
Loading Paper into the Twin Interposer
119