Ricoh IM C6500 User Manual page 283

Message
"Classification A classification
Code is incorrect." code is not
specified.
The document was
printed in a printer
driver that does
not support the
classification code.
"Collate has been The sort function
cancelled." was canceled.
"Command Error" A problem
occurred in the
data because of
the communication
status or another
reason.
A printer driver
that does not
support the
machine was used.
The print command
did not complete
correctly.
"Communication The job was
error with central canceled because
management a Central
server has Management
occurred. The job communication
has been error occurred.
cancelled."
Cause
Consult the machine administrator for the classification
code, and enter the code in [Classification Code] in
[Detailed Settings] on the [Basic] tab
[Job Type] in the printer driver.
Request the machine administrator to change the setting of
the classification code. Machine administrator: Change
[Classification Code] to [Optional] in Web Image
Monitor if necessary.
See "Managing the Number of Printed Sheets Using the
Classification Code", User Guide (Full Version).
Turn off the power of the machine, wait for 10 seconds or
more after confirming that the main power indicator is
turned off, and then turn on the power.
page 13 "Turning On and Off the Power"
Check that the machine can communicate with the
computer properly.
Use the printer driver for the machine. Obtain and install
the latest version of the driver.
In the printer driver, specify [Edge Smoothing] on the
[Others] tab
Check the status of the Central Management machine.
When a Message Appears While Using the Printer Function
Solution and reference
[Special Settings].
[Modify] under
281