Ricoh IM C6500 User Manual page 290

10. Troubleshooting
Message
"Punch has been
cancelled."
"Receiving data
failed."
"Sending data
failed."
"Staple error
occurred. The job
has been
cancelled."
"Staple has been
cancelled."
288
Cause
The Punch function Check the orientation of the paper and print data, and the
was canceled specified punch position.
because the staple
See "Punching Holes on Printed Pages", User Guide (Full
position is
Version).
specified
incorrectly.
Transmission of Send the data again.
data was
canceled.
Transmission of Check that the computer is operating normally.
data from the
printer driver was
canceled.
The number of Check the number of sheets that can be stabled on the
sheets that can be finisher in use.
stapled was
page 337 "List of Specifications for External Options"
exceeded, and
printing was
canceled.
The Staple function Check the specification of the finisher in use, and specify
was canceled the setting accordingly.
because too many
• Number of sheets that can be stapled together
printed sheets
were specified to
be stapled.
• Staple position that can be specified on different
A malfunction Turn off the power of the machine, wait for 10 seconds or
occurred more after confirming that the main power indicator is
temporarily on the turned off, and then turn on the power.
machine.
page 13 "Turning On and Off the Power"
Solution and reference
page 337 "List of Specifications for External
Options"
paper orientation and print data orientation
See "Stapling Printed Pages", User Guide (Full
Version).