Edit Parameter Values; Numeric Keypad - Editing Procedure (480Plus Only) - Rice Lake Legend 480 Series Operation Manual

1.4.2

Edit Parameter Values

To change a parameter value, scroll left or right to view the values for that parameter.
When the desired value appears on the display, press
and move back up one level. To edit numerical values, use the navigation keys to select
the digit and to increment or decrement the value.
When editing numeric values, press
digit selected. Press
value of the selected digit. Press
and return to the level above.
1.4.3

Numeric Keypad - Editing Procedure (480Plus Only)

With the numeric keypad option, the method for editing numeric values relies on the
numbers which are embossed on the keypad in oppose to using the arrows.
1. When editing numeric values, insert the required value using the numeric keypad.
2. Press to save the value entered and return to the level above.
• Press
• Press
When editing fractional numeric values, the decimal point must be
Note
positioned in accordance with the primary units formatting, otherwise the
keyed number may be rejected by the software.
0 0 0 0 0 0
or
Figure 1-4. Editing Procedure for Numeric Values
Figure 1-5. Numeric Keypad for the 480Plus
to set the currently selected digit to 0.
to enter a decimal point.
© Rice Lake Weighing Systems ● All Rights Reserved
(
ENTER
or to change the
to increment or decrement the
to save the value entered
Introduction
) to select the value
TARE
7