Transport And Storage; Scope Of Delivery; Packaging; Transport - Wittenstein cyber dynamic system Operating Manual

®
cyber dynamic system

4 Transport and storage

4.1 Scope of delivery


Check the completeness of the delivery against the delivery note.
 Immediately notify the carrier, the insurance company, or
WITTENSTEIN cyber motor GmbH in writing of any missing parts or damage.

4.2 Packaging

The drive system is delivered packed in foil and/or cardboard boxes.

Dispose of the packaging materials at the recycling sites intended for this purpose.
Please observe the valid national regulations for waste disposal.

4.3 Transport

Note the weight of the payload and use an appropriate transport device.
For specifications on the weights, see chapter 3.9 "Weight".
- Transport temperature: -40 ... 70 °C, max. 20 K/hour fluctuation
- Transport air humidity: Relative humidity max. 95%, non-condensing

4.4 Storage


Store the drive system in horizontal position in the original packaging.
The ambient conditions must be dry, dust-free, and not subjected to vibrations.
- Storage only in ESD-compliant original packaging
- Storage temperature: -20 ... 60 °C, max. 20 K/hour fluctuation
- Air humidity: Relative humidity max. 95%, non-condensing

Store the drive system for a maximum of 2 years.
For storage logistics, we recommend the "first in – first out" method.
Revision: 01
Suspended loads can fall and can cause injuries.

Do not stand under suspended loads.

Secure the drive system before transport with suitable fasteners
(e.g. belts).
Hard knocks, caused by rough handling (for example, falling
or hard dropping), can damage the drive system.

Only use hoisting equipment and lifting accessories with sufficient
capacity.

Never exceed the maximum permissible loads for hoisting
equipment.

Lower the drive system slowly.
The drive system contains components that are sensitive
to electrostatic charge and can be damaged when handled
improperly.

Observe the directives concerning ESD protection.
Doc. no.: 5022-D056658
Operating manual
en-19