Wittenstein cyber dynamic system Operating Manual page 13

®
cyber dynamic system
Revision: 01
A damaged drive system can cause accidents and injury.

Never use a drive system that has been overloaded due to misuse
or a machine crash.

Replace affected drive systems, even if no external damage
is visible.
The hot motor or controller housing can cause serious burns.

Touch the motor or controller housing only when wearing protective
gloves or after the drive system has been idle for some time.
During the mechanical assembly of the drive systems onto the
application, and during mechanical maintenance work, handling
errors can lead to severe crushing injuries as well as to damage
to the drive system or the application.

Have all mechanical assembly and maintenance work carried out
by trained personnel only.

Only use suitable tools for assembly and maintenance work.
During the mechanical assembly and maintenance of kit motors
(rotary motors without housings or linearly moving primary and
secondary parts), the attractive forces of the permanent magnets
can cause severe crushing injuries and damage to the motor or the
application.

Have all mechanical assembly and maintenance work carried out
by trained personnel only.

Only use suitable (e.g. non-ferromagnetic) tools for assembly and
maintenance work.
Doc. no.: 5022-D056658
Operating manual
en-11