Operating manual
2.10 Guarantee and liability
Guarantee and liability claims are excluded for personal injury or material damage in case of
-
Ignoring the information on transport and storage
-
Improper use (misuse)
-
Improper or not carried out maintenance and repair
-
Improper / disassembly or incorrect operation
-
Operation of the drive system when safety devices and equipment are defective
-
Operation of a heavily soiled drive system
-
Modifications or reconstructions that have been carried out without written authorization
from WITTENSTEIN cyber motor GmbH
2.11 Additional documents
You have already received the following documents for your specific drive system:
-
Dimensional drawing (5007–...)
-
System characteristics (5012–...)
-
Encoder system data sheet (5093–...)
For additional information, please contact our Sales department. Always state the
serial number (SN) when doing so.
2.12 Reasonably foreseeable misuse
Any usage that exceeds the maximum permitted speeds, torques and temperature is considered
misuse and is therefore prohibited.
en-8
Doc. no.: 5022-D056658
®
cyber
dynamic system
Revision: 01
Need help?
Do you have a question about the cyber dynamic system and is the answer not in the manual?
Questions and answers