Provide a space between the model number and the serial number.
• After the completion of writing, no verification is performed. Therefore, press the "Read"
button separately to confirm the result of writing.
Data readout
The data (model number and serial number) written in the projector are read out.
When the "Read" button is pressed, the data read out of the projector are displayed in Column [B] in
the specified format.
PC control software for service
Outline software descriptions
This is the PC control software for servicing adjustments to be conducted during the replacement of the
PCB Main Ass'y, OPT BASE, and the LAMP for the LCD projector.
This software makes it possible to perform the following adjustments:
• Adjustment of Flicker
• Modification of usage time for the Usage Time (Lamp, Filter, Panel, and Projector)
Electrical Adjustment
93