Lamp Indicator - Ricoh Sirius-PJ1 Field Service Manual

5. Troubleshooting
Red (cycles of 1)
Red (cycles of 3)
Flashin
g
Red (cycles of 4)
Red (cycles of 9)
Green
Lit
Orange

Lamp Indicator

Indicator display
Off
Green
Red
Flashin
g
Red (cycles of 6)
Red
Lit
Green
122
Cover problem
Power problem
Fan problem
Iris error
Standby mode
(NORMAL)
Button has been pressed
while projector is in key
lock mode
Projector status
The lamp is turned off.
Preparing to relight lamp
after lighting has failed
Lamp replacement grace
period
Lamp does not light
Lamp usage time
exceeded
Lamp lit
The lamp cover is not properly mounted.
Mount it properly.
The cooling fan has stopped turning.
Contact your dealer for repairs.
The iris is not operating properly. Contact
your dealer for repairs.
The projector's keys are locked. The setting
must be canceled to operate the projector.
Procedure
Wait a while.
The lamp has reached the end of its service
life and is now in the replacement grace
period (100 hours). Replace the lamp as
soon as possible.
The lamp has not turned on. Wait at least 1
minute, then turn the power back on. If the
lamp still does not light, contact your
dealer.
The lamp has exceeded its usage time. The
projector's power cannot be turned on until
the lamp is replaced.