How To Withdraw From The Mode - Ricoh Sirius-PJ1 Field Service Manual

5. Troubleshooting
• [INFO.] – [USAGE TIME]
– Display of [PROJECTOR HOURS USED]
• Display of [PANEL HOURS USED]
• [INFO.] – [VERSION(1)]
– Display of [BIOS]
• Display of [BIOS2]
• [INFO.] – [VERSION(2)]
– Display of [BIOS3]
• Display of [BOOTLOADER3]
• [INFO.] – [OTHERS]
– Display of [MODEL NAME]
• Display of [BOOTLOADER3]
• [RESET]
• Setup of [CLEAR PANEL HOURS]
Factory reset
• When [RESET] – [ALL DATA (INCLUDING ENTRY LIST)] – [YES] is carried out in Service Mode,
the language is changed to [ENGLISH] and the language select screen of [LANGUAGE] is
displayed.
• This display continues to remain until any required language is selected or each time input signal
changeover is carried out.
• The data restored to the status of factory shipment as a result of factory reset are all data other than
[SECURITY], [STANDBY MODE], [LAMP LIFE REMAINING], [LAMP HOURS USED], [FILTER
HOURS USED], [PROJECTOR HOURS USED], and [PANEL HOURS USED].

How to withdraw from the mode

• The previous status is recovered when the [Back] key is pressed in the state that no menu is
displayed.
• The previous status is also recovered when the [Standby] key is pressed to recover the standby
condition and starting is performed subsequently.
128