Table of Contents
Advertisement
3. Replacement and Adjustment
4.
Start up PJUpgrader2.exe copied previously.
5.
Press [choose....] button to select the file (********_Data_V102025.bin) to be written.
6.
Check that the set and PC are properly connected each other, then press [Flash] button.
Message "Do you start flash write?" is displayed.
7.
When [Yes(Y)] button is pressed, writing is started.
(Progress bar showing writing situation is displayed.)
8.
Message "Write Finished!" is displayed, when completed. Press [OK] button to finish the
operation.
Error Messages
• Header information is illegal. (-308)
Check the selected file.
PJUpgrader2 for vupf cannot rewrite the firm data
78
Advertisement
Table of Contents
Troubleshooting
