Procedure For Rewriting Edid Data; Outline Software Descriptions; Equipment To Be Used And Environment - Ricoh Sirius-PJ1 Field Service Manual

• Attestation failure. (-1001)
When rewriting the version up field, it is required to set the projector in writing only mode in
advance. (You pressed the wrong buttons when turning on the projector.)
• The model information of the file conflicts with that of the connected projector. (-1002)
Check the projector connecting to the selected file.
The projector connected is not that the selected file can write for.

Procedure for rewriting EDID data

Outline software descriptions

This is PC control software to rewrite EDID data of PCB Main Ass'y supporting PJ X6180N/WX6170N.

Equipment to be used and environment

Equipment to be used
• EDID rewriting software
EDIDWrite.exe
PJUpgrader2.exe
• EDID data (HDMI) ("***" in the file name denotes the version.)
PJ-X6180N_EDID_HDMI_V***.bin
PJ-WX6170N_EDID_HDMI_V***.bin
• EDID data (Analog) ("***" in the file name denotes the version.)
PJ-X6180N_EDID_DSUB_V***.bin
PJ-WX6170N_EDID_DSUB_V***.bin
• EDID data (Display Port) ("***" in the file name denotes the version.)
PJ-X6180N_EDID_DP_V***.bin
PJ-WX6170N_EDID_DP_V***.bin
• PC
A Windows XP / 2000 operable PC, which enables a serial cable and RGB (analog) video
connection with the projector.
• Serial cable
D-SUB9pin-D-SUB9pin, Cross (reverse) cable
Electrical Adjustment
79