Cautions When Connecting An Hdmi Cable; Cautions When Connecting A Displayport Cable - Ricoh Sirius-PJ1 Field Service Manual

[D] : DisplayPort cable (not supplied)
Select the source name for its appropriate input connector after turning on the projector.
Input connector
HDMI IN
DisplayPort
• Turn off the power of the computer and projector before connecting.
• Lower the computer's volume setting before connecting an audio cable to the headphones
connector. When using with a computer connected to the projector, adjust the volume of both the
projector and computer to set the appropriate volume level.
• If the computer has a mini-jack type audio output connector, we recommend connecting the audio
cable to that connector.
• When a video deck is connected via a scan converter, etc., the display may not be correct during
fast-forwarding and rewinding.
• The Computer 1 and Computer 2 video input connectors support Windows Plug and Play. The
Computer 3 video input connector does not support Windows Plug and Play.
• A Macintosh signal adapter (commercially available) may be required to connect a Macintosh
computer.
• To connect a Macintosh computer equipped with a Mini DisplayPort to the projector, use a
commercially available Mini DisplayPort > DisplayPort converter cable.

Cautions when connecting an HDMI cable

Use a certified High Speed HDMI® Cable or High Speed HDMI® Cable with Ethernet.

Cautions when connecting a DisplayPort cable

• Use a certified DisplayPort cable.
• Depending on the computer, some time may be required until the image is displayed.
• Some DisplayPort cables (commercially available) have locks.
• To disconnect the cable, press the button on the top of the cable's connector, then pull the cable
out.
Input button on the projector
cabinet
HDMI
DisplayPort
Functional Test
Button on the remote control
HDMI
DisplayPort
109