3. Replacement and Adjustment
Software installation procedures
1.
Installing PJUpgrader2
Execute "PJUpgrader2_***.exe".
Proceed installing following the instructions.
* When the previous version is installed, uninstall it first. And install the new version.
2.
Installing EDIDwriter
Copy all files of "EDIDwriter" into any folder.
3.
Installing EDIDdata
Copy each EDID data to any folder, and execute.
Rewrite procedure
Change the data as specified below.
1. Rewrite HDMI terminal EDID.
2. Rewrite D-SUB terminal EDID.
3. Rewrite DP (Display Port) terminal EDID.
Rewriting HDMI terminal EDID
80