3. Replacement and Adjustment
• READ/WRITE of factory ADJ data (Flicker, VT, Uniformity, Color Correction, Multi) and Usage
Time data
Equipment to be used and environment
Equipment to be used
• The service adjustment software
• Personal computer (under the conditions that Windows XP/2000 is working and either of serial
ports COM1 - COM9 is D-SUB9-pin)
• Serial cable (D-SUB9pin-D-SUB9pin, Cross (reverse) cable)
Software installation procedures
This software is composed of the following items:
• Service adjusting software
Follow the instructions below to install the files on the PC.
1.
Copy all files into any folder.
Repair and adjustment procedures
Starting and ending methods for adjustments
Method of adjustment starting
1.
Assume a condition that projector and PC are connected through a serial cable and start
the service adjustment software.
94