Table of Contents
Advertisement
5. Troubleshooting
Service Mode
Mode change
How to enter the Expert Mode
When an accessory remote control is used:
• In the state of Power ON, press the keys in the order of [Help]
• Press the [Menu] key to display the menu and confirm that the conditions of [EXPERT] have been
obtained.
How to enter the Service Mode
• In the state of Power ON, press the keys of [Help]
[Menu] for 3 seconds. Then, the [Password] menu is displayed.
• Press the select keys in the order of [ ]
• Press the [Menu] key to display the menu and confirm that the conditions of [Service] have been
obtained.
Additional functions
Menus and functions to be added by the Expert Mode
Difference in the menu screen and its functions
• [SOURCE] – [VIEWER]
• Display of [CHECK PATTERN]
• [SOURCE] – [NETWORK]
– [IMAGE EXPRESS UTILTY]
– Setup of [ADVANCED]
– [DESKTOP CONTROL UTILTY]
– Setup of [ADVANCED]
• Setup of [PING]
• [SOURCE] – [NETWORK]
• Setup of [TEST PATTERN2]
• [ADJUST] – [EXPERT1]
– Adjustment of [R/Cr-GAIN]
124
[ ]
[Enter]
[Help]
[ ]
[ ]
[ ]
[ ]
[ ]
[Help].
[Enter]
[Help]
[Enter]
[ ]
[ ]
[ ]
[Enter].
Advertisement
Table of Contents
Troubleshooting
