3. Replacement and Adjustment
2.
Remove the Polarizer-R [A] ( ×1).
[B] : Make sure to note the direction in which the Polarizer-R is set in the holder. You will notice a
mark in the area enclosed by the blue circle in the figure.
Optical Parts Adjustment
Adjustments needed after the replacement of polarization plates.
Adjusting and fixing parts
[A] : RL2
[B] : RL2 Fixing screw
[C] : Polarization plate (R)
[D] : Polarization plate fixing screw (R)
[E] : Polarization plate (G)
[F] : Polarization plate fixing screw (G)
[G] : Polarization plate (B)
[H] : Polarization plate fixing screw (B)
[I] : M1
[J] : M1 Fixing screw
[K] : FL1
62