Integrator 1 - Ricoh Sirius-PJ1 Field Service Manual

4. Remove the Integrator unit [A] ( ×2).
5. Remove the PS-Converter [A] ( ×2).

Integrator 1

• Carefully handle the removed Integrator to avoid damaging it.
1. Remove the PS-Converter (
2. Remove the Integrator 1 [A] ( ×4).
• When mounting Integrator 1, press it up against the area shown in the lower right of the figure,
then screw it into place.
p.50).
Parts Replacement
51