Table of Contents
Advertisement
Procedure
12
Optional: Fabricate a long foot component.
•
Cut 2 layers of carbon fibre cloth to size (fibre ori
entation: 45°).
•
Position the carbon fibre cloth on the foot compon
ent.
INFORMATION: A flexible forefoot component is
fabricated in this example.
Position carbon-fibreglass webbing from the heel to the
rollover edge in a - pandm - l direction.
Apply carbon fibre stockinette (5 cm wide) in the lateral
course of the bar.
Optional: Position 1 layer of Perlon stockinette and 1
layer of decorative fabric as the final layer or use 1 layer
of carbon fibre cloth.
Prepare templates for this purpose. Transfer the blanks
to the carbon fibre cloth and cut them out.
17AD100
Advertisement
Table of Contents
