Opening A Case With Jtac; Revision History - Juniper MX2020 Quick Start Manual

MX2020 3D Universal Edge Router Quick Start

Opening a Case with JTAC

Revision History

Copyright © 2015, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
72
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool:
https://tools.juniper.net/SerialNumberEntitlementSearch/
You can open a case with JTAC on the Web or by telephone.
Use the Case Management tool in the CSC at
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, visit us at
http://www.juniper.net/support/requesting-support.html
January 2015—530-053305. Revision 1. Minor updates.
July 2014—Minor updates.
April 2014—Added information on PDM slot numbering and DIP switches.
January 2014—Updated instructions for the router transport kit.
July 2013—530-048234. Revision 1. Initial release.
http://www.juniper.net/cm/
Copyright © 2015, Juniper Networks, Inc.
.