MX2020 3D Universal Edge Router Quick Start
Step 5: Reinstall Components
44
To reinstall the components in the router:
Take each component out of its electrostatic bag, and identify the slot on the
1.
component where it will be connected.
NOTE:
Remove the shipping covers before installing router components.
Slide each component into the chassis evenly so that it does not become stuck or
2.
damaged.
NOTE:
We recommend reinstalling the rear components first.
Tighten the captive screws, and secure all levers for each component.
3.
NOTE:
Make sure that all empty slots are covered with a blank panel
before operating the router.
Copyright © 2015, Juniper Networks, Inc.