Mechanical Installation
March 2020
9. Place the protection sleeve on the flange.
Mount the transmitter head and tighten the nut. Check that the guide pins on the adapter enter the
corresponding grooves on the upper wave guide.
Figure 2-13. Completed Mechanical Installation
10. Proceed with the electrical installation.
2.6
Mounting the cone antenna - quartz sealing
Figure 2-14. Cone Antenna Dimensions
Dimensions are in inches (millimeters)
Antennas including tank seal of quartz material are suitable for high pressure applications.
28
Protection
sleeve
7.87 (200)
Junction box
2.76 (70) (3 in. cone)
3.66 (93) (4 in. cone)
5.55 (141) (6 in. cone)
7.44 (189) (8 in. cone)
15.75 (400)
3.74 (95) (3 in. cone)
5.91 (150) (4 in. cone)
10.24 (260) (6 in. cone)
14.57 (370) (8 in. cone)
Reference Manual
00809-0100-4024, Rev CA
Mechanical Installation