RC4000 ACU Boardset
2.1.2.2.10 J10 - Keypad
Designation
J10
"Keypad"
The J10 connector allows a 4 row x 4 column keypad (see 2.2.6) to be utilized as part of the user
interface. Note that the operable length of this connection is limited to 1 foot (30 cm) or less. The pinout
details for J10 will not be provided here as the correct cable will be supplied along with the keypad from
RCI. The J10 connector would also be used for the optional Local Jog Control Panel (2.2.7).
2.1.2.2.11 J11 - Processor JTAG
Designation
J11
unmarked
Factory programming of microcontroller.
2.1.2.2.12 J12 - PLD JTAG
Designation
J12
unmarked
Factory programming of PLD.
Chapter 2
PCB
Pin Count
8
PCB
Pin Count
20
PCB
Pin Count
10
27
Hardware
Connector
Unshrouded Header
Connector
Tyco Vertical Header
Connector
Tyco Vertical Header
Type #
9
Type #
8
Type #
8